Apply 1 - 2 coats of finish as directed above. Floor surface must be clean, dry and free of residue before finish is applied. Top scrub the floor using a top scrub cleaner and recommended floor pad to remove the top soiled layers of finish. INTERIM MAINTENANCE: Sweep large debris and dust mop (using a water-based treatment). The use of a cleaner/restorer is recommended to condition the floor and extend the time between top scrub and recoating. Damp mop or automatic scrub using a neutral pH cleaner. ROUTINE MAINTENANCE: Sweep large debris and dust mop (using a water-based treatment). Note: This product is a self sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a sealer will enhance gloss and long term performance. Elevated temperatures and humidity may extend dry time. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop or applicator system. RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on stripper label. Recommended for use on all types of resilient tile (vinyl composition, vinyl, linoleum) and properly sealed hard surfaces (marble, terrazzo). The perfect labor saving advantage for Educational and Retail facilities which have little or no time for floor burnishing. This unique chemistry results in an high gloss, long wearing finish that cures faster and harder than any other metal-interlock finish.

Hard As Nails floor finish utilizes highly durable internally cross-linked polymers blended to achieve a harder floor finish film.

Betco hard as nails floor finish